Shed Specifications

Standard Shed construction & Specifications

Our sheds are built as strong as a house we are proud to say that we use no OSB board or particle board on any of our sheds!!

We frame all our sheds using double top plates and notch all the corner top plates to tie in all the walls, just like a house.

Floor

Built on a level patio block foundation, floor joist are 2"x6" pressure treated, 16 on center with a 2"x6" center beam for a solid continuous support. The floor is covered with 3/4 thick plywood!!

Walls

framed using 2x4’s spaced 16’’on center.

Siding

T1-11 is a thick 5/8 wood panel.

Vinyl sheds walls are sheathed with 1/2 inch house quality plywood.

Pine wood siding

1”x8” tongue and groove.

Door

One double, fiberglass door ( door opening 5 foot ). Or your choice of a wood door. Doors come with lock and keys.

Trim

(T1-11 and pine sheds) 1"x4" pine corner boards, 1"x6" pine fascia boards and 1"x6" pine rake boards for the gable ends.

Vinyl sheds are trimmed with White Vinyl corner board or PVC boards, 1"x6" PVC fascia boards and 1"x6" PVC rake boards for the gable ends. .

Vents

one 4 foot ridge vent..

Roof (6 pitch)

2"x4" rafters 16" on center, framed using a solid 2”x6” ridge beam and sheathed with 1/2 CDX house quality roof plywood. 16 WIDE SHEDS: 2”X6” ROOF RAFTERS 16" on center, framed using a solid 2”x8” ridge beam and sheathed with 1/2 CDX house quality roof plywood.

Roof (Gambrel)

2"x4" rafters 16" on center, framed using solid wood trusses and sheathed with 1/2 CDX house quality roof plywood. 16 WIDE SHEDS: 2"x6" rafters 16" on center, framed using a solid 2”x8” ridge beam and sheathed with 1/2 CDX house quality roof plywood.

Roof (Deluxe)

2"x6" rafters 16" on center, framed using a solid 2”x8” ridge beam and sheathed with 1/2 CDX house quality roof plywood.

Shingles

30 year architectural roof shingles.